How Keenso Renewable Energy Controllers Can Benefit Your Solar Panel System
If you are interested in setting up your own renewable energy system, then you should check out the Keenso Renewable Energy Controllers. These units are highly customizable, with features like adjustable set points, temperature sensors, and battery protection. In this article, we will discuss a few of the key features of these products. Read on to discover how these products can benefit your solar panel system. After reading this article, you will be able to choose the best one for your needs.
The temperature sensor on Keenso Renewable Energy Controller's T60 solar charge controller is designed for remote solar energy studies. Recommended uses include monitoring air temperature, determining atmospheric stability conditions, calculating PV panel efficiency, and identifying icing conditions. For calibration purposes, the sensor also comes with a calibrated version. This device is designed for the highest-quality measurement of battery temperature. It measures battery temperature to within 1 degree Celsius.
Adjustable set points
Most renewable energy controllers allow you to adjust the set points of your batteries. Some of them have a built-in temperature sensor. But you can also get a controller with a remote temperature probe, which you attach directly to the battery. This way, the controller will send the appropriate commands when the battery voltage falls below the set point. Alternatively, you can manually change the set points of your batteries. Depending on the temperature of your battery, this may be sufficient once or twice a year.
When selecting a charge controller, you need to take the battery type into consideration. Most renewable energy systems use deep-cycle lead-acid batteries. The standard deep-cycle lead-acid battery is called flooded. Sealed batteries have saturated pads between the plates. This type of battery uses a closed design and requires a slightly lower set point voltage. While they can be called maintenance-free, they must be maintained properly. Ideally, they should be adjusted to compensate for battery temperature.
Protects batteries from overcharge
The main function of the Keenso Renewable Energy Controller is to protect the batteries from overcharge. As the voltage level varies with time, the controller adjusts its charging state to avoid overcharging or undercharging. A battery can only survive up to 80 percent of its original charge before it begins to deteriorate. Overcharging or undercharging the battery will shorten its lifespan and cause it to become unusable.
Charge controllers are crucial to protect your batteries from overcharging and overdischarging. They protect batteries from overcharging and undercharging and ensure optimal performance. They are installed to prevent these issues by automatically shutting off the electricity to non-critical loads and reconnecting them when the battery is fully charged. They also protect the battery from damage due to overcharging. In addition to protecting batteries, these devices also feature other useful features.
Charge controllers are highly configurable and can be programmed to monitor various parameters. The most common parameters that are monitored are the voltage level, the percentage charged, and the time to discharge the battery to fill the load. Some charge controllers also include inbuilt memories to record events. This is particularly helpful if you need to troubleshoot. Whenever the set point voltage is reached, the charging will cease and the battery will be unusable.
Different climate factors and battery bank voltage determine the performance of the charge controller. For best results, choose a controller that can handle the prevailing climatic conditions and the battery voltage. Also, make sure that the controller you choose is compatible with the rated amperage of your charging devices. The MPPT controllers are more advanced than PWM, and can protect your batteries from overcharge.